Deckorators decking is engineered to stay beautiful with very little upkeep, but knowing how to clean Deckorators decking the right way ensures long-lasting performance. Whether you have Deckorators® Voyage, Vault, Vista, Tropics or another collection, regular cleaning helps prevent stains, mold, and weather buildup. Using the correct tools, mild cleaners, and safe techniques recommended by Deckorators makes maintenance simple.
This guide combines official Deckorators care instructions, seasonal maintenance tips, and easy cleaning methods to help you keep your deck looking fresh all year.
Simple Ways to Keep Deckorators Decking Clean Each Season
Basic weekly or monthly maintenance goes a long way in keeping your outdoor space clean. Understanding the right approach is essential when learning how to clean Deckorators decking correctly.
Steps to Clean Everyday Dirt on Deckorators Decking:
- Sweep or Blow Off Debris:
Clear leaves, dirt, and pollen using a broom or leaf blower. - Rinse With Water:
Use a garden hose to wash away remaining dust and open the gaps between boards. - Mix a Mild Cleaning Solution:
Warm water + mild dish soap or a general composite deck cleaner. - Use a Soft, Non-Metal Brush:
Scrub lightly along the grain. Deckorators recommends soft-bristle brushes for all lines. - Rinse Completely:
Make sure every section is washed clean to prevent soap film.
Safe Use of a Power Washer on Deckorators Decking
Deckorators allows power washing, but it must be done carefully. Used correctly, it’s one of the easiest seasonal methods for how to clean Deckorators decking.
Power Washing Guidelines:
- Use the Lowest Pressure Setting:
High pressure can damage the cap, so always start on the lowest setting that still cleans effectively. - Keep the Nozzle 8 – 12 Inches Away:
Holding the wand too close can scar or strip the surface, so maintain a safe distance from the boards. - Use a Fan-Tip Nozzle Only:
A fan-tip spreads the water out, reducing direct force on the deck and helping prevent surface damage. - Wash in Long, Smooth Strokes:
Move the spray in steady passes along the board direction for an even clean without streaks. - Avoid Holding Pressure in One Spot:
Staying in one place too long can leave marks or erode the surface, so keep the wand moving at all times.
Removing Mold & Mildew From Deckorators Decking
Moisture and organic buildup can lead to mold or mildew, especially in shaded areas.
Best Mold Cleaning Methods for Deckorators Composite Decking:
- Use a Sodium Percarbonate Cleaner:
Deckorators approves oxygenated cleaners for mold and mildew removal. - Apply Mold-Inhibiting Products When Needed:
Brand-safe mold cleaners help prevent regrowth. - Scrub Lightly With a Soft Brush:
Clean along the board pattern without pressing too hard. - Rinse Thoroughly:
Remove all residue to prevent streaks or returning growth.
Cleaning Stains, Spills & Tough Marks on Deckorators Decking
Stains are common on outdoor living spaces, but Deckorators decking can be cleaned easily using the correct methods.
Approved Deckorators Cleaners for Specific Stains:
- Grease & Oil:
Use a household degreaser, then rinse well. - Food & Beverage Stains:
Warm water + mild soap + soft brush. - Rust Marks:
Use an oxalic-acid-based cleaner. Rinse immediately after use. - Tough or Sticky Residue:
Deckorators allows limited use of mineral spirits, xylene, or petroleum-based cleaners for spot treatment.
* Always rinse thoroughly.
How to Deal With Construction Dust on Deckorators Decking
Concrete, stucco, mortar, or masonry dust can permanently discolor composite boards if not handled correctly.
Steps to Remove Construction Dust Safely:
- Cover the Deck During Masonry Work:
Keep cement dust, stucco residue, or mortar particles off the boards. - Avoid Using Colored Chalk:
Only white chalk is safe – colored chalk can leave permanent stains. - Start Dry:
Blow or sweep off dust before adding water. - Use Mild Soap:
Remove remaining haze using warm water and mild dish soap. - Rinse in Sections:
Work in small areas to prevent streaking. - Allow to Air-Dry:
Reduces mineral spotting or residue.
Getting Rid of Hard Water Spots on Deckorators Decking
Hard water can leave chalky mineral deposits that dull the appearance of your deck.
How to Clean Hard Water Stains:
- Apply White Vinegar Directly:
Vinegar helps break down the mineral deposits that cause cloudy hard water spots. - Let It Sit for a Short Time:
Give the vinegar a few minutes to loosen the buildup without letting it dry on the surface. - Scrub Gently With a Soft Brush:
Use light pressure and a soft-bristle brush to lift the mineral residue safely. - Rinse the Area Thoroughly:
Wash away the loosened deposits and any remaining vinegar to prevent streaking. - Repeat If Necessary:
Stubborn spots may need a second round for a fully clean finish. - Allow the Boards to Air-Dry:
Let the deck dry naturally for a clean, even appearance with no residue.
Winter Care: Snow & Ice Removal for Deckorators Decking
Winter maintenance is simple when you understand how to clean Deckorators decking during cold months.
Safe Winter Cleaning Tips:
- Use a Plastic Shovel Only:
Metal shovels can scratch or gouge composite boards. - Ice Melt Is Allowed:
Deckorators confirms that ice melt does not cause known adverse effects. - Avoid Using Sand:
Sand is abrasive and can damage the deck surface. - Remove Snow With the Grain:
Shovel parallel to the board direction. - Rinse Residue in Spring:
Wash away leftover salt to keep the surface clean.
Reducing Static Electricity on Deckorators Decking
Static buildup can happen on dry composite surfaces, especially in winter or low-humidity areas.
Tips to Minimize Static:
- Clean Dust and Debris Often:
Regular sweeping reduces friction and helps prevent static buildup on dry composite surfaces. - Avoid Rubber-Backed Mats:
Rubber materials can increase static electricity, so choose mats with fabric or vinyl backing instead. - Improve Airflow Under the Deck:
Good ventilation prevents dry pockets of trapped air, which reduces static formation. - Use Anti-Static Products When Needed:
Approved anti-static sprays can help neutralize buildup during dry or high-static seasons. - Keep the Boards Clean in Dry Weather:
Dust settles faster in low humidity, so clean more frequently during dry months. - Rinse the Surface During Static-Prone Conditions:
A quick hose-down adds moisture and temporarily reduces static on the deck surface.
Things to Avoid When Cleaning Deckorators Decking
To keep your deck protected from unnecessary wear!
Things to Avoid:
- Avoid Metal Shovels or Tools:
Metal edges can scrape, gouge, or permanently mark the composite surface. - Skip Harsh or Unapproved Chemicals:
Strong cleaners may damage the cap layer or discolor the boards. - Do Not Drag Furniture Across the Deck:
Always lift or use pads to prevent scratches and scuff marks. - Avoid Using Sand for Ice Control:
Sand is abrasive and can grind into the surface, leaving visible damage. - Do Not Pressure Wash Too Close or Too Strong:
High pressure or close contact can erode the surface and create permanent streaks.
Keeping Your Deckorators Deck Looking Its Best
Knowing how to clean Deckorators decking the right way ensures your outdoor space stays beautiful, safe, and long-lasting. Routine care doesn’t need to be complicated – using mild soap, soft-bristle brushes, and brand-approved cleaners is enough to maintain the surface. Make a habit of removing debris, rinsing the boards regularly, and addressing spills or stains as soon as they appear.
Seasonal care also plays a major role. Keep snow and ice under control with safe tools, avoid harsh chemicals during winter, and rinse away salt once the weather warms. In shaded or damp areas, check for mold or mildew and use the recommended oxygenated cleaners when needed. Maintaining good ventilation beneath the deck helps prevent moisture issues and reduces static buildup during dry conditions.
By following these simple, brand-specific guidelines, you protect the performance and appearance of your Deckorators deck. Consistent upkeep, safe cleaning practices, and awareness of what to avoid will help your decking withstand everyday use and changing weather while maintaining its color, traction, and overall beauty for many years.
If you need Deckorators cleaners, replacement boards, railing upgrades, or expert advice, visit one of our showrooms in Plainfield, IL or Spring Grove, IL, or shop anytime through our Premium Decking Supply online store. We’re here to help you build, maintain, and enjoy a deck that lasts.
Top 5 FAQs About How to Clean Deckorators Decking
The best way to clean Deckorators decking is to use mild soap, warm water, and a soft-bristle brush. Rinse thoroughly to remove all residue.
Yes. Deckorators allows pressure washing using a fan-tip nozzle, low pressure, and keeping the wand 8–12 inches from the boards.
Use a sodium percarbonate cleaner and scrub gently with a soft-bristle brush. Rinse well to prevent mold from returning.
Yes. Deckorators states that common ice melt products do not cause known negative effects on composite boards.
Use strong chemicals sparingly. Deckorators allows limited use of mineral spirits or oxalic-acid cleaners for spot treatment, always followed by thorough rinsing.
